Intermec Pd41 Driver
Hello,
I'm quite new to label printing, and somehow I can't manage to set up the size of the labels.
When I try to print a "test" page from the driver, it prints the word TEST (in a nice border) , but on 2 labels.
So I guess the media size is not correctly set up. I also printed a configuration page, where I have the same problem.
Can somebody help me how to set up correctly the printer?
Thanks in advance , Albert
I'm quite new to label printing, and somehow I can't manage to set up the size of the labels.
When I try to print a "test" page from the driver, it prints the word TEST (in a nice border) , but on 2 labels.
So I guess the media size is not correctly set up. I also printed a configuration page, where I have the same problem.
Can somebody help me how to set up correctly the printer?
Thanks in advance , Albert
0
-
Are you sure your printer is properly calibrated to your stock? More often than not, that is the cause of printing off a label, rather than the media size in BarTender. Unless, of course, the page/label size really is wrong in your Page Setup screen. If that's the case, adjust that or get it as close as possible. 0 -
Shotaro Ito
★ BarTender Hero ★
Paper size is defined in Printing preferences.
In Printer and Fax folder, right click the printer icon, select Printing preferences > Page setup tab > Stock > add.
If you use BarTender, as nRyder say, select "User defined size" and input width and height.
You can run printer calibration from Right click printer icon > Printer Properties > Tools tab > Action.
Make sure your sensor setting is right, which can be adjusted from Print dialog's document property > Stock tab.
(Select proper Media type - Use Label with gaps etc.)
Often printer's configuration page doesn't care about page length - it's common to overwrap to next page. To check paper size, use BarTender or your standard application for testing (or simply Wordpad.)0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
2 Kommentare