Page Size/ Stock Size Setup Issue Zebra Epl Printers Folgen
I have 3 different Zebra EPL printers that all have the same oddity when printing from Bartender. Using non-continous gapped labels 0.08" from the left margin and bottom margin are unprintable areas.
BarTender Enterprise Automation version 10.0
Product: Zebra EPL Driver
Windows XP SP3, Win7 32-bit and 64-bit
I set up my printers and follow the calibration techniques for the printers. Then I take the calibrated values from the printers to use for setting up the stock information.
my GC420t printer gives me q408 Q102,24 which equates to a 2" W 0.5"H and 0.12" Gap reading.
Under the printing preferences -> Page Setup -> Stock I set up a New stock with
(all measurements in INCHES.)
Width: 2.00 Height 0.50
Left 0.05 Right 0.06
Gap Height: 0.12 Gap Offset: 0.0 (adjusting this just makes them go higher up the label, it won't accept a negative value)
In Bartender I have the page setup for the same values.
No matter what adjustments I make I cannot make the printers print inside this area. This is particularly an aggravation when I have to print on 0.375" x 0.375" label stocks. I have toyed with the Gap Offset and the advanced options for Position Adjustment. All of my stocks are portrait and 0 degrees.
None of my other Zebra printers have this issue. GX430t, ZM400 for reference.
Thanks in advance if you need any additional information I am ready to supply it.
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.