Printing alignment
I am printing from a bagger machine. The bags feed in landscape so i have the label defined as landscape. They are 4.5 inches wide when held in the correct direction after printing. i have them defined as 4.5 wide. The print seems to adjust to the right as the labels print, for a few labels and then back to almost printing on the border. i hope the attachment with pictures helps me explain it more clearly.
-
I would argue this is an issue with the bags you are printing on- I'm not seeing any blackmark/index mark. Without it the print is being indexed only on the distance traveled which can cause it to drift based on the size being sent to the printer and imperfections in the stock causing stretching/slipping while feeding through the print engine. Without some way for the engine to index the bags it will be very difficult to get a consistent print.
If you would like to attempt solve it through BarTender I would recommend adjusting the print length (it needs to be exact- maybe try using the driver settings in mm instead of inches since that what the steppers would run off of) and then adjusting the left/top offset adjustments in the driver (print -> documents properties).
0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
1 Kommentar