Printing Problems Folgen

0
Avatar
Haroon Muhammad

Hi,

 

We recently bought a Postek 168C/200 label printer with your software for the labels. I can print, but every alternate label get printed. So the printer prints the first label then skips the 2nd label then prints the 3rd label and so on. 

 

I have been through all the settings and also created another template. I have checked the dimensions of my labels, but I still have the same problem. Every alternate label gets printed.

 

Regards,

Haroon Muhammad

1 Kommentare

0
Avatar
Pete Thane
Aktionen für Kommentare Permalink

That does sound like either a configuration issue with the printer settings themselves or a problem with the label template. I have not used one of those printers but I would suggest:

Reboot the printer and once it is back online Feed one label from the printer itself (not via the software) and then feed a second label. If the printer just feeds out one blank label each time then it is configured correctly itself and so it is a software issue, if not it is a config/calibration issue with the printer.

If it is a software problem make sure you have configured the label correctly.

  • The page width is the width of the label with gutter/backing whilst the height is the label itself with the gap as the printer should pick this up  
  • In the File>Print>Document Properties>Stock make sure the printer is set to the correct type of media (label with gaps) and the gap height setting is correct

 

 

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.