Epicor 2 labels 1 integration
Hi
I have an issue of selecting the write label during the integration depending on the part
Epicor
From Epicor one .bt file per part
In Bartender
2 differents labels size and Printer
Label 1 (4x6) printer A
Label 2 (2x4) printer B
Depending of the part it will go to Label 1 or 2
Integration
I cannot fint in the integration/Command Script where to set, that depending on the part it will go on label 1 or 2.
Than ks for your help
Philippe
-
If you are using a Commander Script file with the %BTW%.....%END% brackets round that data then you will need to include a /PRN= for the name of the printer to use and the /AF...btw command will need to specify the name of the label format to use.
0 -
Hi Pete
the file with the script is coming form the same place (module in Epicor) so I cannot assign a different Printer or Label name.
But you have a point I did not think about.
Ok I try to do a search and replace on the script to edit the label name and printer name.
But what I was not able to do is create liste for all the parts related to the Printer/Label in the search and replace
Ex
Part a,b,c...etc goes with Printer A alnd Label A
Part 1,2,3...etc goes with Printer B alnd Label B
Thanks
0 -
Hi
As a note.
The part name is in every file (but not the printer and label name)
Field - OrderDtl_PartNum
I cannot attach my file here
0 -
Not sure if it is possible but if you are actually using Integration Builder to control the production of the labels, then, unlike Commander, the printer name and label format name can be included in the data elements of the the trigger file rather as part of the commands in the %...% "brackets".
I have a feeling you may need to configure Integration builder to ignore the bracketed commands and include for example Record Range set to 3 in the settings etc.
0
Please sign in to leave a comment.
Comments
4 comments