Saltar al contenido principal

Búsqueda

Búsqueda

How to force print over the size restriction?

Comentarios

2 comentarios

  • Avatar
    Peter Thane

    I do not think you can. BarTender will take the media settings/maxiumns from the spec of the driver itself and looking at the spec sheet of the printer it says the maximum print length is approx 8 inches (203mm). The only ways round this I could see, although I am not sure they would work would be 

    • install a similar printer resolution (203dpi) driver that accepts the same programming commands/language as the 214TT but does not have the maximum print length and use that
    • see if you can find an old driver release that does not have the max print length embedded into it   
    0
  • Avatar
    Michael Chen

    Hi Thank you for your reply,  I finally solved the problem, I end up change the driver from Argox OS-214TT to Argox OS Plus 214 then create new label setting under printer preferences with 3" wide and 43" (This driver allow maximum of 43" length instead of 8") length with continuous paper setting.  Now she is able to print ribbons with maximum 43" in length which is enough for her needs. 

    0

Iniciar sesión para dejar un comentario.