Odette conversion to standard 4 x 6 label format

Rich Crossen

• 21 de octubre de 2020 13:46

Is it possible to take an Odette label format and print it to a reduced 4 x 6 label format?  I have a customer that specifies the Odette format but allows for printing on a standard 4 x 6 Zebra printer but I'm not sure how to shrink or convert the label.  Is this even possible?

-1

• 

  Peter Thane

  ★ BarTender Hero ★

  • 21 de octubre de 2020 14:58

  If you change it in the same ratio then BarTender should prompt you if you want it to resize the label in the same proportion. 

  The image on the right is 148 wide by 210 high whilst the one on the left is 100mm wide by 142mm high using one of the sample Odette labels that come with BarTender.

  

  Once you have converted by proportion you can then adjust it to suit, such amend the size 100x150mm and then again BarTender will ask you if you want to let it to adjust the field sizes to suit to.

  You may want to add a Zebra driver that can accept a 148mm label format width first and connect the label to this and then adjust the page size from 148mm wide and 210mm and then select all and rotate the fields by 90 degrees. After that adjust the page size as above and then relink the label to the correct printer and tweak the page to the size you want to use.

  I hope this helps

  0
• 

  Rich Crossen

  ★ BarTender Hero ★

  • 22 de octubre de 2020 14:43

  Thanks Pete!  We'll give it a try and see what happens!

  0

Iniciar sesión para dejar un comentario.