Zebra Lp2824 Plus And Driver V7.3 S’abonner
I'm trying to install the Zebra LP2824 Plus and seagull's driver on Windows 7. Everything seems to install fine. I installed the driver, connected the printer, it set it up plug-n-play and then I reset the driver to the LP2824 v7.3 driver, I've been told NOT to use the '2824plus' driver. I can get the config page to print and even got the test page from Windows to print once. However, it seems after it prints the status light flashes red as if there is no stock in the printer, which there is. I press the feed button and the stock keeps feeding until I open the top to stop it. The status light blinks green most of the time, hardly ever a steady green. We are using this to print ticket stock for a theatre company, eventually need to print tickets from Center Stage Software's WinTix (haven't gotten that far!). I've reset the printer to factory defaults, re-set the page to 2x5.5" which is the size of our stock, unloaded/reloaded the stock, etc. We have an LP2824 we've used for 2 years and it works fine. It's this 'plus' we're having trouble with!
Any assistance, ideas, etc will be welcomed. Thank you!
Vous devez vous connecter pour laisser un commentaire.