Setting Darkness Through Print Command Script
I am trying to print a document using print command script. There are multiple templates, and each has its own data file however there is only one printer. Now I would like to print the following way:
1. Sample1.btw with Speed as 2 per second and Darkness at 7.
2. Sample2.btw with Speed as 4 per second and Darkness at 8.
What setting or parameters need to be set in the trigger file's bartender command line, to achieve this? Currently my top two lines look like the following.
%BTW% /AF="D:\Label_Print\Sample1.btw" /PRN="ZebraPrinter" /C=2 /R=3 /P /D=%Trigger File%" /Close
%END%
-
I do not think that is possible via Commander Script commands but you can make these settings specific to a label format.
Use this option on File>Print>Object Print Method (shown below) and after that adjust the speed settings/darkness etc to suit via the screens that are available from the File>Print>Document Properties button, remembering to save the label once done.
0 -
Thanks. I was checking in the Document Properties already, however was not able to somehow save the document afterwards. Now I have figured that out, i.e. after making the changes, one needs to click on Close the button Print Dialog Box. After which time the btw file needs to be saved. Thanks.
0
Vous devez vous connecter pour laisser un commentaire.
Commentaires
2 commentaires