Add A Custom Paper Size
I am using
Printer: Zebra 105Se (203 dpi)
Port: USB001
Product: Zebra ZPL-II Driver
Version: 7.2.2
on window 7 professional
I try to use user defined stock
USER
Label Width: 4.00 in
Label Height: 1.00 in
Left Liner Width: 0.05 in
Right Liner Width: 0.05 in
and my document size is 2.0x0.5
The printer cannot stop right after it print out a label. It always comes with three blank label.
If I use the bigger size of label,like 4.0x1.5, I don't have this issue.
What is the minimum size of label the driver can support?
Printer: Zebra 105Se (203 dpi)
Port: USB001
Product: Zebra ZPL-II Driver
Version: 7.2.2
on window 7 professional
I try to use user defined stock
USER
Label Width: 4.00 in
Label Height: 1.00 in
Left Liner Width: 0.05 in
Right Liner Width: 0.05 in
and my document size is 2.0x0.5
The printer cannot stop right after it print out a label. It always comes with three blank label.
If I use the bigger size of label,like 4.0x1.5, I don't have this issue.
What is the minimum size of label the driver can support?
0
-
I'm not sure I understand why you are creating a stock size in the driver that you have if your document seems to be of totally different dimensions. Can you give us some more details here? What application has created your document, and how is it laid out on the stock size page you created?
It should be noted that the printer itself will have some limitations in terms of the smaller label sizes; you should consult the printer's user manual for details. If you try to print on a stock smaller than what the printer can handle with its sensors, then a result could well be to feed out a number of blank labels as the printer struggles to register on them correctly.0 -
Legacy Poster
★ BarTender Hero ★
[quote name='Ian C - Seagull Support' timestamp='1318925938' post='840']
I'm not sure I understand why you are creating a stock size in the driver that you have if your document seems to be of totally different dimensions. Can you give us some more details here? What application has created your document, and how is it laid out on the stock size page you created?
It should be noted that the printer itself will have some limitations in terms of the smaller label sizes; you should consult the printer's user manual for details. If you try to print on a stock smaller than what the printer can handle with its sensors, then a result could well be to feed out a number of blank labels as the printer struggles to register on them correctly.
[/quote]
I found the problem. I changed different size of label, but I didn't perform the calibration procedure. After I perform the calibration procedure, it is working.0 -
Legacy Poster
★ BarTender Hero ★
Hi,
could you please tell the steps for calibration. I am also facing same problem you faced before.
Thanks
I found the problem. I changed different size of label, but I didn't perform the calibration procedure. After I perform the calibration procedure, it is working.
[/quote]0 -
Legacy Poster
★ BarTender Hero ★
[quote name='praveen' timestamp='1319143883' post='862']
Hi,
could you please tell the steps for calibration. I am also facing same problem you faced before.
Thanks
I found the problem. I changed different size of label, but I didn't perform the calibration procedure. After I perform the calibration procedure, it is working.
[/quote]
Different printer use different procedure. You need to check your user manual.0 -
If the printer supports running a calibration via a printer command; you should find that the printer driver can send this to the printer via the driver properties under the "Tools" tab clicking the "Action" button menu to find the "Run Calibration" item. Otherwise, crack open the printer's user manual for instructions on what to do. 0
Vous devez vous connecter pour laisser un commentaire.
Commentaires
5 commentaires