Aller au contenu principal

Recherche

Recherche

Commentaires

6 commentaires

  • Avatar
    Shotaro Ito
    Hi drcs,
    As far as the specified area is within your printer's capability, you can modify label size in BarTender's file > Page setup > Page tab and Layout tab.
    File > Label format option > View tab's [Show unprintable region] check shows printable boundary on design view, which might helps.
    You have some control over label size and paper size from PageSetup class in ActiveX / .net Print SDK.
    0
  • Avatar
    Legacy Poster
    [quote name='Shotaro I -Seagull Support' timestamp='1330043031' post='1821']
    Hi drcs,
    As far as the specified area is within your printer's capability, you can modify label size in BarTender's file > Page setup > Page tab and Layout tab.
    File > Label format option > View tab's [Show unprintable region] check shows printable boundary on design view, which might helps.
    You have some control over label size and paper size from PageSetup class in ActiveX / .net Print SDK.
    [/quote]


    When I show printable area there is a "left margin" considered non printable area when I have my margins set as 0. I was looking for a way to change this.
    0
  • Avatar
    Shotaro Ito
    [quote name='dcrs' timestamp='1330043687' post='1822']
    When I show printable area there is a "left margin" considered non printable area when I have my margins set as 0. I was looking for a way to change this.
    [/quote]

    I wonder the printer you use requires some margin at left.(many label printers designed like that.)
    What is the printer model do you use, and do you use Driver from Seagull?
    0
  • Avatar
    Legacy Poster
    [quote name='Shotaro I -Seagull Support' timestamp='1330050571' post='1825']
    I wonder the printer you use requires some margin at left.(many label printers designed like that.)
    What is the printer model do you use, and do you use Driver from Seagull?
    [/quote]

    Cognitive advantage dlx dbd42 203dpi
    with Seagull driver
    0
  • Avatar
    Shotaro Ito
    [quote name='dcrs' timestamp='1330051364' post='1826']
    Cognitive advantage dlx dbd42 203dpi
    with Seagull driver
    [/quote]
    Thanks for the info. The printer's default unprintable area is 3.8mm, and printable width is 104.1mm.
    so, please design within that range. (give 3.8mm left margin.)
    (From printer properties > Information tab > Version, you can see the specification from driver's aspect.)

    (edit: In printer properties > Printer option > tools > Printer specification, you can set the non default value - however usually this won't work and may cause error / unexpected result to all labels you print, so not recommendable.)
    0
  • Avatar
    Legacy Poster
    [quote name='Shotaro I -Seagull Support' timestamp='1330065540' post='1827']
    Thanks for the info. The printer's default unprintable area is 3.8mm, and printable width is 104.1mm.
    so, please design within that range. (give 3.8mm left margin.)
    (From printer properties > Information tab > Version, you can see the specification from driver's aspect.)

    (edit: In printer properties > Printer option > tools > Printer specification, you can set the non default value - however usually this won't work and may cause error / unexpected result to all labels you print, so not recommendable.)
    [/quote]

    I will give that a try..
    0

Vous devez vous connecter pour laisser un commentaire.