Editing The Raw .lbl File
Hello, we are running into an issue where we need the .lbl file that is sent from BarTender to our printer to contain the CAB command 'P' to set the post action to peel off mode. How are we able to configure the output file to include this command?
-
You would normally enable this within the driver settings in the label.
If you are using a Seagull driver then you will find this option on the File>Print>Document Properties and the Stock tab. as shown below:
Please note, if the Use Current Printer Settings is ticked then BarTender will not send down and label settings, such as which sensor to use and the Peel Off mode and so when the labels print the printer will use the settings enabled in the front panel of the printer itself
0 -
Thank you Peter!
This was what we originally changed and was working when printing directly from the BarTender UI, but not working when using our API call on the file.
It turns out that the engineer who wrote the API call had the source .btw pointed to a hidden location in the server that we eventually found and edited that specific file to have peel off mode enabled.
0
Vous devez vous connecter pour laisser un commentaire.
Commentaires
2 commentaires