Label Printer Print Density Rollback Issue
Bartender Version : 2016 R7
The printer properties in the Windows Control Panel are as follows:
A Printer
Model: ZDesigner ZM 300 dpi (ZPL)
Speed: 15.2
Darkness: 25
B Printer
Model: ZDesigner ZT410 300dpi ZPL
Speed: 15.2
Darkness: 25
When printing the Sample.btw label, it prints correctly on the B Printer.
However, after printing on the B Printer, if I print on the A Printer, the label is printed faintly.
Simultaneously, the print density of the A Printer device automatically changes to 15.
The server printer properties have not changed.
To resolve this issue, I launch Bartender Designer, select Sample.btw, click print, choose A Printer, go to Document Properties, change the print density to 25, close, and save. This restores the correct print quality.
But, the same issue occurs again when printing on the B Printer. Is there a way to prevent the print density of the A Printer from rolling back?
-
I would suggest replacing the ZDesigner variants of the driver with the Seagull drivers and retest this to see what this does. Although the ZDesigner work without issue in most instances I have occasionally comes across issues that the above switch corrected without any other action.
0
Vous devez vous connecter pour laisser un commentaire.
Commentaires
1 commentaire