Epicor 2 labels 1 integration S’abonner

0
Avatar
Philippe Courcelle

Hi

I have an issue of selecting the write label during the integration depending on the part

 

Epicor

From Epicor one .bt file per part

 

In Bartender

2 differents labels size and Printer

Label 1 (4x6) printer A

Label 2 (2x4) printer B

Depending of the part it will go to Label 1 or 2

 

Integration

I cannot fint in the integration/Command Script where to set, that depending on the part it will go on label 1 or 2.

 

Than ks for your help

 

Philippe

 

 

4 commentaires

0
Avatar
Pete Thane
Actions pour les commentaires Permalien

If you are using a Commander Script file with the %BTW%.....%END% brackets round that data then you will need to include a /PRN= for the name of the printer to use and the /AF...btw command will need to specify the name of the label format to use. 

0
Avatar
Philippe Courcelle
Actions pour les commentaires Permalien

Hi Pete

 

the file with the script is coming form the same place (module in Epicor) so I cannot assign a different Printer or Label name.

But you have a point I did not think about.

 

Ok I try to do a search and replace on the script to edit the label name and printer name.

But what I was not able to do is create liste for all the parts related to the Printer/Label in the search and replace

Ex

Part a,b,c...etc goes with Printer A alnd Label A

Part 1,2,3...etc goes with Printer B alnd Label B

 

Thanks

0
Avatar
Philippe Courcelle
Actions pour les commentaires Permalien

Hi

 

As a note.

The part name is in every file (but not the printer and label name)

Field - OrderDtl_PartNum

 

I cannot attach my file here

 

0
Avatar
Pete Thane
Actions pour les commentaires Permalien

Not sure if it is possible but if you are actually using Integration Builder to control the production of the labels, then, unlike Commander, the printer name and label format name can be included in the data elements of the the trigger file rather as part of the commands in the %...% "brackets".

 I have a feeling you may need to configure Integration builder to ignore the bracketed commands and include for example Record Range set to 3 in the settings etc. 

Vous devez vous connecter pour laisser un commentaire.