Commander Not Working 关注

0
Avatar
Legacy Poster

Hi Team,

 

We purchased the Bartender EA software version 10.1 (SR3). Commander at client is running as Application and the SLServer is running in Service option. Using the Network file option commander is not working. Basically Bartender label will be in local PC ,the commander will be in the local PC and the text file is from the Bartender server ( Text file is dropped by SAP using FTP). 

 

1. Trigger tab, settings are done correctly. Attached screen1

2. Command tab, settings are done correctly. Attached screen2

3.  After start detecting, it shows file found. attached screen3 but no file replacement and no printing happens. 

4. I tried changing to service option also no use. 

 

 

am i missing something? Please assist. 

 

Regards,

 Vinoth 

 

 

1 评论

0
Avatar
Shotaro Ito
评论操作 固定链接

First, try Commander to run as Application mode, start task, then Detection menu > [Show All running BarTenders] to show BarTender, then drop trigger to see what happens.

Also, enable both BarTender and Commander's logging, from Administer menu > Log setup.

Usually, you can see any error or unexpected behavior.

 

When you run Commander as Service and scan / open network folder or print to network printer, you need to specify a login account to Commander Service, from Administer > Service Setup.

The account needs local administer rights and enough access rights to the network folder / printers.

For detail, please read Commander Troubleshooting.

http://forums.seagullscientific.com/index.php?/topic/55-commander-troubleshooting/

请先登录再写评论。