Failed To Install Printer 'tsc Ttp-245C' Using Seagull Driver Wizard 追蹤

0
Avatar
Legacy Poster

When installing the TSC TTP-245C printer driving using the Seagull Driver Wizard for an Ethernet connection on a Windows 8 machine I get the:

Seagull Driver Wizard '"Failed to install printer 'TSC TTP-245C'" error message

What port do I need to select when installing this printer for an Ethernet connection? I assume that I have to create a TCP/IP port?

I created a TCP/IP Port for a Generic Network Card, IP address of 192.168.0.21 with a protocol of RAW, Port 9100. 

 

I have previously successfully installed this printer for a USB connection, but my business requires an Ethernet connection.

 

Can anyone help with how to install this printer for an Ethernet connection?

 

 

2 意見

0
Avatar
Domingo Rodriguez
版主
評論操作 永久連結

What type of port did you choose for the connection? "Standard TCP/IP port"?

 

Also, are all Seagull printer drivers installed on this PC of the same version? If not, then use the "DriverWizard.exe" to remove all existing Seagull drivers on this computer, download the latest 7.3.3. drivers from our website, unzip the new driver files, launch DriverWizard.exe again, and use it to install the latest 7.3.3 drivers. As the port, choose to create a "Standard TCP/IP" port.

 

If the installation process still fails, please make a log of the printer driver installation and get in contact with our support at:

http://www.bartenderbarcodesoftware.com/label-software/technical-support.aspx#contact

 

In order to enable logging, you will need to open the Windows registry and add the following DWORD value:

HKEY_CURRENT_USER\Software\Seagull Scientific\DriverWizard\DiagnosticMode

Set the value to 1.

0
Avatar
Legacy Poster
評論操作 永久連結

Yes, I was using a "Standard TCP/IP Port".

 

I downloaded the latest DriverWizard.exe (version 7.3.3)

I ran the Wizard to remove all Seagull Drivers

I than successful ran the DriverWizard.exe to install the TSC TTP-245C printer Driver.

 

Thank you for the feed back.

 

Printer is now working as expected using the Ethernet connection.

登入寫評論。