Intermec Pd41 Driver 追蹤

0
Avatar
Legacy Poster

Hello,
I'm quite new to label printing, and somehow I can't manage to set up the size of the labels.
When I try to print a "test" page from the driver, it prints the word TEST (in a nice border) , but on 2 labels.
So I guess the media size is not correctly set up. I also printed a configuration page, where I have the same problem.
Can somebody help me how to set up correctly the printer?
Thanks in advance , Albert

2 意見

0
Avatar
Legacy Poster
評論操作 永久連結

Are you sure your printer is properly calibrated to your stock? More often than not, that is the cause of printing off a label, rather than the media size in BarTender. Unless, of course, the page/label size really is wrong in your Page Setup screen. If that's the case, adjust that or get it as close as possible.
0
Avatar
Shotaro Ito
評論操作 永久連結

Paper size is defined in Printing preferences.
In Printer and Fax folder, right click the printer icon, select Printing preferences > Page setup tab > Stock > add.
If you use BarTender, as nRyder say, select "User defined size" and input width and height.
You can run printer calibration from Right click printer icon > Printer Properties > Tools tab > Action.

Make sure your sensor setting is right, which can be adjusted from Print dialog's document property > Stock tab.
(Select proper Media type - Use Label with gaps etc.)

Often printer's configuration page doesn't care about page length - it's common to overwrap to next page. To check paper size, use BarTender or your standard application for testing (or simply Wordpad.)

登入寫評論。