[Solved] Installation On Win2008R2 Print Cluster
I am having troubles installing the Seagull drivers 7.3.1 for a Compact 4 on a Windows 2008 R2 print cluster.
I get two error messages before the installation stops.
Here is the first one: Unable to install D-O- MP Compact4 Mark II (203) Type 3 - User Mode, x64 driver. Operation could not be completed (error 0x800f0204)
After clicking "OK" the second one appears: Failed to add driver. Operation could not be completed (error 0x00000578)
Has anyone experianced this or has a similar print server construct which worked with these drivers?
Thanks for checking this!
-
The attached PDF should help you. 0 -
Legacy Poster
★ BarTender Hero ★
Thanks for your reply!
Installing the driver on each node via the control panel worked for me.0 -
Jens Nilsson
★ BarTender Hero ★
I have the same problem, can you repost the PDF with instructions.
EDIT:
My printer is a 182-PC
First error is 0x00000242
Second error is 0x00000578
0 -
Jens: I cannot remember what that PDF might have been which was posted to the previous forum that we hosted. I suggest you take a look at some of the below articles on installation.
https://support.seagullscientific.com/hc/en-us/sections/200804788-Installation
I also recommend you download and install the latest version of the printer driver, rather than an older version such as v7.3.1 like was used in the original post.
0 -
Jens Nilsson
★ BarTender Hero ★
Hi Ian,
non of the articles mention a Windows 2008 R2 print cluster which this thread is about.
I downloaded the drivers from your site today.
The printer is with ethernet.
0 -
Jens: I suggest you contact technical support.
0
請登入寫評論。
評論
6 條評論