How To Print To Pdf 追蹤

0
Avatar
Legacy Poster

I'm new to BarTender.

I have tried numerous times to generate/print pdf file of BarTender Label (.btw file) using PDF Printer such as BullZip PDF Printer, but the result is not correct (the paper-size).

The label size is about 101.6 x 30 mm. But the pdf file generated is always defaulting to A4 ( 210 x 297 mm).

Here is what I did. From the command line in BarTender installed Directory, I executed the following:

bartend.exe /AF="c:\some_directoty\testlabel1.btw" /P /PrintJobName="TestPdfPrint1" /PRN="Bullzip PDF Printer"

What I'm not sure about are the following:
1. Can a pdf be generated/printed from BarTender?
2. Is it possible to  generate/print a PostScript file from BarTender (basically print to PostScript)?

Thank you in advance for any help or tip.

 

11 意見

0
Avatar
Legacy Poster
評論操作 永久連結

You may want to go into your .btw file, make sure the PDF printer is selected, and then go into your page setup (File > Page Setup) to adjust the page size there.

You can definitely print PDFs from BarTender if you do that. I have been doing it for a long time, but I almost always have to confirm the page setup screen is correct and specifying the page size I want.

0
Avatar
Legacy Poster
評論操作 永久連結

Thanks a lot for your help. I appreciate it.
As you pointed out, I modified the .btw file so that the printer is Bullzip PDF Printer and the paper-size too (File > Page Setup).
And it generated the Pdf with the correct size. yeah... 

If I may, I have another question.
Is it possible to automate the steps to modify what is in the .btw (for example: the target printer and paper-size) programmatically  instead of doin it by manually? 

Thanks again for your help.

0
Avatar
Ian Cummings
版主
評論操作 永久連結

Make sure you saved the label after setting the page setup.  Depending on your PDF driver, you might need to create a custom size in the driver and then select that for your page setup in BarTender.  Again, save the document once changes have been made.

0
Avatar
Legacy Poster
評論操作 永久連結

Does anyone know a PDF-printerdriver, which automatically supports customer paper-sizes. We have been using Foxit 2.0, but the newer versions do not support this.

 

Our proces is to generate automatically PDF-labels (different sizes) with Bartender in combination with a PDF-printer-driver.

0
Avatar
Ian Cummings
版主
評論操作 永久連結

It seems that PDF Creator supports custom page sizes.  Not sure about the automatic side of the question though.

0
Avatar
Seb Atkins
評論操作 永久連結

When integrating with a PDF printer how do you select where to save the file and any file naming structures?

0
Avatar
Ian Cummings
版主
評論操作 永久連結

Seb Atkins: You set the destination folder in the settings of the PDF driver utility.  Where to find this varies, depending on the driver solution you choose to use.

0
Avatar
Richard Evans
評論操作 永久連結

When I try printing to PDF always get a blank label.  It looks fine in the designer, but always prints just the watermark in version 2019.  In older versions the page is simply blank.   Initially was printing to Microsoft PDF printer, then after reading this thread tried PDFCreator and made a customer paper size the same as the label.   The result was the same (blank).   

I've tried PDF, JPG and PNG image settings in PDFCreator.   Any suggestions?

 

0
Avatar
Ian Cummings
版主
評論操作 永久連結

Richard: BarTender 2019 supports printing to PDF natively, without the need to use a third party printer driver.  You will see it listed as "PDF" in the printer list of BarTender.  I suggest you use that instead.

0
Avatar
Richard Evans
評論操作 永久連結

Thanks.  Works great from within the designer. 

I'm troubleshooting an issue using the .NET SDK, however.  Is there any way to make "PDF" a local PC printer?

 

0
Avatar
Ian Cummings
版主
評論操作 永久連結

Richard: As of BT2019 R4 you would need to make the document with the native PDF printer already selected.  In a future release we would hope to make PDF selectable as a printer at print time via automation, but this is not possible just yet I believe.

登入寫評論。