Printing Two Different Labels On One Print Job 追蹤

0
Avatar
Legacy Poster

HI  Guys

 

i have diecut label on a roll that we were printing serialised barcodes on no problem.

 

I now have an issue where i have been asked to print two different label layouts (with the same serial number) so one layout with the serial number 900000 then a second layout with the serial number 900000 followed by the original laout with serial number 9000001 etc etc

 

Any ideas how i can do this with bartender

 

4 意見

0
Avatar
Ian Cummings
版主
評論操作 永久連結

In the "Page Setup" dialog of the document go to the "Templates" tab and create a second template for your second label design.  Create a second serial number for an object on the second template that uses a matching start number.  Print document for X number of serial numbers.

0
Avatar
Legacy Poster
評論操作 永久連結

thanks for your reply....however i see no templates tab in the page setup

 

im using bartender 9.01

 

the problem seems to be that the printer is seeing the space between the labels when printing

 

any tips on how to proceed from here?

0
Avatar
Canguita
評論操作 永久連結

Hello,

 

Please note that the templates design on the same label is available from version 10.0.

 

Anyway I would like to make sure about your request, do you need to print 2 labels with a serial number? If yes, you only will need to design a label and create a Serial Number on it (browse to your text object properties and "Advanced Options" for it). So, in the print dialog you need to indicate how many serialized labels you want to print.

 

Can you let me know what do you mean exactly when you say that the printer is seeing the space between the labels when printing? Have you set up properly your "Page Setup", have you specified in the printer driver that you are using "Label with gaps"?

 

Please try to provide us with a full description about what do you need exactly: Are the labels differents or are the same label design with a serial number that will increase on each printing? Is there any problem with your page setup?

 

Thanks,

 

Carlos

0
Avatar
Ian Cummings
版主
評論操作 永久連結

What you're trying to do, treating two die cut labels as one, is not possible as the printer won't allow it.  There are some exceptions to this rule, some Intermec printers for example, but generally the printer is the block on this idea.

 

Sounds like you need to get yourself an updated version of BarTender that will easily support what you want to do in the manner I've described.

登入寫評論。