Wait for 2 second in current print job using excel

Bakar Ali

• 2022年08月27日 10:08
• 編輯於

We have a Starter plan. And we are using excel as a database to print my label. So there are 500 to 1000 labels are printing in one job. We just need a 2-second hold in the current print job so we can cut the label while the product gets changed.
And when to stop is based on database field as like print qty.

0

• 

  Peter Thane

  ★ BarTender Hero ★

  • 2022年08月29日 14:20

  With certain printers you can make them go into Pause mode after certain events/intervals and so I am not sure if this will help you achieve what you want to do. When you are ready to restart the operator would have to release the Pause button

  

  0
• 

  Bakar Ali

  ★ BarTender Hero ★

  • 2022年08月30日 13:24

  Thanks Peter for the your support, But We are using TSC brand printer and its not support pause feature 

  0
• 

  Peter Thane

  ★ BarTender Hero ★

  • 2022年08月30日 15:58

  Not got a printer to test on, but looking at the TSC programming manual it looks like if you send an <ESC>!P command to the printer then that should pause it.

  You could try adding this to the label and give it a quick test. You can add the command as shown below:

  

  0

請登入寫評論。