How To Create And Print A Label Set
I have a label I need to print which is a set of 3. One 79 x 138mm label, followed by two 70 x 40mm labels one after the other.
How do I go about creating this file. So far I have done one big label design with all of them in, but I don't know how to get the printer to calibrate every 3 labels.
Any help would be much appreciated!
We are using a 110Xi4.
-
Is this tag stock, or some kind of custom label stock?
You can't create templates of different lengths in one document, because the length of the template is only sent to the printer at the start of the job, not separately for each label. You can create three documents, each at the proper size, and then use Batch Maker to print all 3 documents in succession. This may not work for every situation, but take a look at it and see if it suits your needs.
0 -
In your label media, assuming it's a custom stock, are the three labels of the set separated by a gap (that can be detected by the printer) or are they butt/perf cut with the only gap being between the set?
If the former, then you'll need to create you label design to encompass the entire set, if the latter then you could try the approach mentioned by the other Ian.
0
Please sign in to leave a comment.
Comments
2 comments